Then, the fpc2 conveyor, which is automatically transported to the downstream packaging system, is sent to the burman cold stretch film wrapper fpc1. “The system has a lot of advantages. On the one hand, energy consumption can be greatly reduced. On the other hand, the consumption of compressed air can be greatly reduced. Using recycle material is thin film at the same time, so, the new system is energy conservation and environmental protection crib cost-effective tray package solution “is our idea, B is interpreted in this way. In addition, the new system is different from other similar packaging devices, and for the system, it does not need to use a complex, energy-intensive, high-cost hydraulic system.
As we can see, Mr. B is telling the story when the burman cold stretch wrap machine fpc1 is doing what is being done to cover the stretch film on the tray. “Accurately buttress a height measurement is ultrasonic sensors, B continue explained,” and then, according to the height of crib piece, the system can also pull out the corresponding length of film, after the heat sealing, we need to do is to be cut from the film roll down “. The packing is very high, and in general, it can reach 2,200 mm. Generally speaking, it is necessary to stretch the film cover horizontally after the heat sealing and cutting. The factors that determine the tensile degree of the film are the size of the stack, the film elasticity, the film size and the stability of the stacking. Do you know what the (motor driven) rollers are of any use? It can be moved to a membrane position, while the membrane is pressed tightly throughout the movement. People pull the film hood down to the bottom of the tray, and the stretched thin film hood can be placed on the entire pallet. At this point, the roller and the bow are coordinated, they can release the film, the bottom stretch is formed by the membrane cover.